Screw fixing agent is applied to the screw before fitting.

This is a liquid fixative that fills the gap between the screw and the nut.

Make the joint surface reach 100% to form an overall combination!

Description:

1. Shake well before use.

2. The best result is to degrease the parts with solvent accelerate cure speed and clean parts with instant primer.

3. Follow the getting started guide.

4. Apply enough adhesive/sealant to fill the seams and assemble.

5. The parts will be fixed within 1 hour and fully cured for 24 hours. Accelerated curing at 75F (200F for 10-20 minutes).

6. Store in a cool place.

WARNING：Contains Methacrylic Esters.

May be very irritating to the eyes.

Avoid direct eye contact.

May irritate sensitive skin.

Recommended hand cream.

Avoid prolonged contact.

Need to be cleaned after skin contact.

If eye contact, please rinse immediately with water for 15 minutes and immediately send a doctor.

High performance polymer, all materials from the UK.