Characteristic:

1.Special resin for civil structure

2. Quickly consolidate after installation, with high bearing capacity and high tensile strength

3. Excellent penetration and adhesion force to concrete, high adhesion force to screw, can fix screw in concrete

4. Wide operating temperature range -5 ℃ ~ 40 ℃

5. Fixed by adhesive force, it will not damage the concrete of the construction part, and it has a reinforcing effect

6. No compression pressure on concrete, suitable for narrow places

Instructions for installation steps:

Drill holes in concrete with recommended hole diameter and depth using electric hammer drill

Use a diamond drill to drill through the reinforcement

Rinse with a brush and blower or water to clear the holes

Check the chemical anchor bolt tube and make sure it is not damaged and the internal resin can flow normally

Put the medicine tube into the clean hole with the round head inward

Make sure the screw is clean. Use the installation tool and electric hammer drill to rotate the screw to the bottom of the hole at the same speed (recommended that the speed of the electric hammer drill is 250-500rpm) to break the medicine tube and allow the medicine to mix thoroughly

Check whether the surface of the hole has overflowed to ensure that the hole is full; check whether the depth of the screw has reached the surface of the substrate to ensure that the screw reaches the required depth

Wait for the curing time according to the recommended curing time. Do not bump or strike the chemical anchor during this time.

Application:

1. Is made of concrete, rock, etc.

2. When the new project does not have rebars or screws reserved, it can be used as reinforcing steel bars and screws.

3. Old building additions, reconstructions, beams and columns expansion, structural reinforcement or engineering changes

4. Equipment installation, guardrail installation

Shelf life: about 2 years

Specifications:

M10, M12, M16, M20, M24

package:

M10, M12, M16 a set of 10

M20 set of 8 into

M24 set of 6 into